Allied Moulded 9335=NKRED Red Fire Circuit Fiberglass Box
Allied Moulded 9335=NKRED Red Fire Circuit Fiberglass Box by Allied Moulded at Parish VFC. MPN: 9335=NKRED. Hurry! Limited time offer. Offer valid only while supplies last. Allied Moulded Fire Circuit switch and outlet boxes are molded of impact-resistant, high-strength fiberglass reinforced thermoset polyester material.
Allied Moulded Fire Circuit switch and outlet boxes are molded of impact-resistant, high-strength fiberglass reinforced thermoset polyester material. They feature the red color for easy denotation that these boxes are part of a Fire Circuit. Our FiberglassBox "Premier Series" line of products was created for the electrical contractor looking for non-metallic outlet boxes with "hard box" characteristics. That's why Allied Moulded's FiberglassBox line is known as "The Contractor's Choice" and offers the following advantages: Non-corrosive, Non-conductive and no ground required, Non-distorting in high heat, Will not melt, Shatter resistant in cold temperatures, Lightweight and a Heat insulator. All Allied Moulded fiberglass boxes are classified by Underwriters Laboratories for use in 2-hour rated walls or ceilings. Allied Moulded FiberglassBox series boxes are proudly made in the United States and have many labor saving features. Such as Offset gauge marks on the box give a positive stop for the proper wall thickness. Bright common nails fit securely in specially designed supports and are angled for easy installation. Tapered and machine tapped device holes allow device screw to be started by hand and speed installation time with high torque screwdrivers. Cubic inch capacity clearly marked and easy for contractor and inspector to locate and identify. Proudly UL listed. Knockouts are complete, reducing drafts and easily removed with wire for no tools installation. Leveling ribs position face of box parallel to wall surface. 2-Hour Fire Rating clearly marked for easy inspector identification.
Features & Highlights
- This 3-1/2" diameter, duplex outlet box has 20.5 cubic Inch of volume
- Mounts with fetter ring nails
- Features 2 non-metallic Speed Klamps for securing wiring within the box
|Item Weight:||5.55 pounds|
|Item Size:||3.5 x 3.5 x 3.5 inches|
|Package Weight:||5.55 pounds|
|Package Size:||10.8 x 7.7 x 7.7 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Allied Moulded, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 53151-SUB, ean: 0655222872876,
2 Pcs, 4" Square Extension Ring, Converts One Gang to 4 Square, 1-1/2 In. Deep, (6) 1/2 In. & (6) 1/2 & 3/4 In Knockouts, Zinc Plated Steel1-1/2in deep, 4in square extension rings with (8) 1/2in & (4) 1/2in-3/4in side knockouts, are used to converts ...
mpn: SR-5, ean: 0835243000773,
The Orbit SR5 is a device ring for use with 5gang boxes. It can be used to mount electrical fixtures, switches, and many other devices into the multigang box. This Orbit device ring conforms to UL514A regulations and is raised 3/4" to fit extra thick...
By Thomas & Betts
mpn: 2707998, ean: 0795092707998,
Item Package Quantity-2;Thomas And Betts: 3/4 Inches Knockout Seal Bl1121 -2Pk...
mpn: SR-6, ean: 0835243000780,
The Orbit SR6 is a device ring for use with 6gang boxes. It can be used to mount electrical fixtures, switches, and many other devices into the multigang box. This Orbit device ring conforms to UL514A regulations and is raised 3/4" to fit extra thick...
Description: This waterproof junction box is made from ABS flame retardant material,it can be used indoor and outdoor electrical,communications,fire fighting equipment,iron and steel smelting,petrochemical,electronics,electricity,railways,constructi...
mpn: FB-75, ean: 0655222881724,
5 Pcs, 3/4 In. Zinc Plated Steel Screw In Type Insulating Bushing, Zinc Plated Steel Used to Insulate Sharp Cut Edge of Flexible Metal Conduit3/4 screw in bushings are used to insulate the sharp cut edge of flexible metal conduit so wires passing thr...
mpn: 8231, ean: 0050169002315,
RACO square box, 4-inch square x 2-1/8In. Deep, welded construction. Each side has two 3/4 in. Knockouts. Bottom has one 1/2-inch and four 3/4-inch knockouts.With proper fitting can be used for conduit, nmsc, armored, metal clad, flex cable. Square b...
Feature: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please pr...
By Arlington Industries
mpn: DSBHS1C-1, ean: 0018997025289,
Replaces the installation of an electrical box and bubble cover assembly. Installs in the wall, so less of it shows outside. Cover is removable for easier device installation. Grounding wire provided. For use with metal raceway systems. Two-hour fire...
mpn: 46111-OW, ean: 0655222878250,
2 Pcs, 3-1/2 In. Round Old Work Pan Box, 1/2 In. Deep, (2) 1/2 In Knockouts, Zinc Plated Steel to Mount Ceiling, & Wall Lighting Fixtures...